Printer has the wrong network settings
If one of these network settings in the printer is incorrect, you will not be able to
communicate with the printer:
•
Communication Mode
•
Network Name (SSID)
•
Channel (Ad hoc networks only)
•
Authentication Type
•
Encryption
•
WPA
Follow these steps to correct the printer's network settings:
1. Connect the printer to your network or computer with an Ethernet cable.
2. Open the printer's
embedded Web server (EWS)
.
HP Deskjet 6800 series printer
144
3. Click the Networking tab, and then click Wireless (802.11) under the
Connections heading.
4. Use the Wireless Setup wizard on the Wireless Setup tab to change the printer's
settings to match the settings of the network.
5. Close the printer's EWS, then disconnect the Ethernet cable from the printer.