Preparing to print
To print a single card, use the
photo/envelope feeder
.
To print multiple cards, follow these steps:
1. Verify that the printer is turned on.
2. Remove the Out tray, then remove all paper from the In tray.
3. Slide the paper-width guide all the way to the left, then pull out the paper-length
guide.
4. Place the cards, with the sides to be printed on facing down and one of the
short sides pointing towards the printer, into In tray and to the right. Push the
cards into the printer until they stop.
HP Deskjet 6800 series printer
90
5. Slide the paper guides firmly against the cards.
6. Replace the Out tray.